Coffee Machine Tutorial

PromptDirector Editorial View source ↗

A 30-second capsule coffee machine installation and setup tutorial video. 0-2s, the opening title text reads: seedance capsule coffee machine installation and use tutorial 2-5s, Step 1: install the water tank, see [reference image 1] Shot: medium shot, slight high angle. Position: back of the machine body. Action: align the water tank with the slot on the back of the body, push it straight down until it clicks into place. Requirement: clearly show the alignment between the tank's bottom clip and the body's slot, the transparent part of the tank showing the water level line. Voiceover: "First, install the water tank." 5-9s, Step 2: install the drip tray, see [reference image 2] Shot: close-up, front view. Position: front of the bottom of the body. Action: push the drip tray parallel into the rails at the bottom of the body until it fully seats at the bottom. Requirement: show the rail-alignment process, highlighting the smoothness of the sliding-in action. Voiceover: "Next, align the tray with the bottom rails." 9-13s, Step 3: install the used-capsule collection box, see [reference image 3] Shot: close-up, slight low angle. Position: the cavity beneath the drip tray. Action: align the collection box with the recess and push it in, flush with the drip tray. Requirement: show how the collection box fits with the body, confirming it is seated correctly. Voiceover: "Then insert the capsule collection box." 13-18s, Step 4: first fill with water, see [reference image 4] Shot: close-up, side view. Position: top / back water tank of the body. Action: open the tank lid, pour in clean water up to the MAX water level line, close the tank lid. Requirement: highlight the water level marking, the water pouring in clearly visible. Voiceover: "Open the tank lid and pour in clean water. Be careful not to exceed the maximum water level line." The image highlights the maximum water level line. 18-25s, Step 5: power on, see [reference image 5] Shot: medium shot, front view. Position: front of the body. Action: plug in the power cord, press the power button, the indicator light changes from blinking to steady (preheating complete). Requirement: close-up of the power button and indicator-light state change, showing the process from waiting to ready. Voiceover: "Connect the power and press the power button." 25-30s, Step 6: first rinse (no capsule), see [reference image 6] Shot: medium to close-up, front-side view. Position: front of the body, cup under the spout. Action: without inserting a capsule, press the brew button directly, hot water flows out to rinse the lines, the water flows into the cup. Requirement: emphasize the "no capsule needed" prompt label, showing the whole rinse-water flow. Voiceover: "Last step, the first rinse. No capsule needed, just press the brew button. Your coffee machine is now ready to use."

Rights belong to the original creator or other rights holders